DWX-42W Spindle Replacement Kit (Refurbished)

Do catálogo de Dental Lab Depot

Roland DWX-42W Spindle Replacement Kit Replacement time When scratches or rust appears on the tapered portion of the collet If the collet is deformed Required Tools Collet replacement jig Collet tap Taper cleaner Collet brush Grease Collet - ZC-3D Remarks If a large force, such as an overload during Milling, is applied to the collet, the collet may have become deformed. Remove the collet. Drain the old coolant 1-Show VPanel. 2-Select the machine to operate. 3- Click the following windows is displayed 4- Open the front cover. 5- Remove the workpiece, rotary axis correction jig, and ATC magazine correction jig. 6- Click [OK]. The following window is displayed automatically. 7- Press the collet replacement jig against the collet, and then insert the collet tap. Align the hexagonal tip of the collet and the hexagonal portion of the collet replacement jig. CAUTION Rotate the collet replacement jig with the collet tap inserted. If the collet replacement jig is rotated without the collet tap inserted, the collet may be damaged. 8- While gently pressing the collet tap up into the hole, rotate the collet replacement jig in the direction indicated in the figure Rotate the collet replacement jig until the collet naturally comes free. Attach the new collet. 1- Clean the inside of the spindle (where contact with the collet is made) with the taper cleaner. Rotate the taper cleaner left and right as if you are brushing the inner portion of the spindle. 2- Apply a thin layer of grease to the